If Rail Traffic is detected with no End-Of-Train Marker the Train Controller must be
informed.
Rail Traffic may Travel at the discretion of the Train Controller only as far as the next
Location where the marker can be replaced.
Rail Traffic must be worked in accordance with Rule 5023 Manual Block Working
until the End-Of-Train Marker has been replaced.
The Train Controller must confirm that:
the Rail Traffic is Complete; or
the Sections to the rear of the Rail Traffic are clear.
If the Rail Traffic is unable to be confirmed as Complete, affected Sections must be
treated as Obstructed in accordance with Rule 2009 Reporting and Responding to
Conditions Affecting the Network.
Until it can be established that the section is clear, the Train Controller must:
apply Blocking Facilities to prevent other Rail Traffic from entering the affected
Section;
tell Rail Traffic Crew within the affected Section to Stop their Rail Traffic; and
warn Rail Traffic on Adjacent lines.